Wedge Up and Down Solar Wall Light

The Wedge Up and Down Solar Wall Light is a small black wall fitting that sends one beam of warm white light up the wall and two down. Its three 1W LEDs each sit behind an optic lens and together produce 100 lumens at 1 metre, enough to pick out the texture of brick, stone or render after dark.

Why you'll love it

• One beam up, two down. Three separate shafts of warm white light give the wall a defined pattern.
• Optic lenses. Each LED has its own lens, which keeps the beams bold and directional.
• A housing that will not corrode. The body is impact-resistant, non-corrosive ABS with a UV-stabilised black finish and an IP45 rating for dust and water protection.
• Charges by day, runs at night. A 1.3W monocrystalline panel and a 3.7V 1200mAh lithium battery give approximately 6 to 8 hours of operation, with automatic day and night switching.

Where to use it

This is a light for surfaces with texture: brickwork, stonework and rendered walls. It suits feature walls, stairways, walkways, driveways and pool perimeters. On a wall behind a garden bed, the two downward beams graze the wall and land on the foliage below, while the single upward beam draws the eye to the height of the wall or to a climber trained on it. It mounts flush with no external wiring, so no electrician is needed. Position it where the built-in panel receives direct sun, as a fitting under deep eaves will not charge fully.

Specifications

• Light output: 100 lumens at 1 metre
• LEDs: 3 x 1W warm white (3000K), 1 up and 2 down
• Battery: 1 x 3.7V 1200mAh lithium
• Solar panel: 1.3W monocrystalline, built in
• Run time: approximately 6 to 8 hours
• Protection rating: IP45
• Construction: impact-resistant, non-corrosive ABS, black
• Controls: on/off button, automatic day and night operation
• Mounting: flush wall mount
• Warranty: 1 year